This Swann DVR camera compatibility guide helps customers find replacement security cameras that work with Swann surveillance systems. The guide and FAQ is also helpful if you are looking for a replacement DVR that works with Swann cameras.
NVR camera systems use wireless and IP cameras whereas DVR security systems use analog (CCTV) cameras. With Swann you can mix and match indoor and outdoor cameras, choose your camera resolution from 1080p to 4k ultra high-definition, as well as choose cameras with two-way audio and night vision.
This guide is for Swann DVRs that use hard wired security cameras via coax cable and BNC connectors. You can see what BNC video inputs looks like on the back of a DVR in the above image. Network video recorders (NVRs) will not be covered in this guide. I will write a Swann NVR / IP camera compatibility guide in the future.
Swann DVR camera compatibility is categorized below according to the video format (camera type) that each DVR model supports. Some DVRs support more than one type which is why some DVRs are listed in more than one category. DVRs that are compatible with more than one video surveillance format are known as hybrid DVRs.
We also have the Swann camera DVR compatibility guide here in PDF format.
Smart Security System User Manual (multiple models) User manuals for the latest updates of: DVRs: 4480V, 4580V, 4780V, 4980, 5580 NVRs: 8580. The Swann cameras and DVR/NVR systems are great. But if you have any warranty issues - you're dead out of luck. I purchased a 16 camera NVR system. All worked except one camera. Support called me back three times with different techs to try and figure out the issue. I told them the camera was just defective. They wouldn't accept that. Swann security camera setup and control This video shows you how to set up your Swann security cameras, connect them to the Swann DVR, and view video feeds remotely with the SwannView Plus app. Tips for Placing Your Cameras. Camera manuals and free digital camera pdf instructions. Find the user manual you need for your camera and more at ManualsOnline. Swann Security Camera Product Support ManualsOnline.com.
Please note that Swann typically uses the following product code prefixes to note their 4ch, 8ch, and 16ch DVR models: DVR4-, DVR8-, and DVR16-.
1080p AHD Cameras (Analog HD)
The following Swann DVR models are compatible with these 1080p AHD cameras.
- DVR-4500
- DVR-4600
- DVR-4480
- DVR-4550 – DVR4-4550, DVR8-4550, DVR16-4550
- DVR-4575 – DVR4-4575, DVR8-4575, DVR16-4575
- DVR-4580 – DVR4-4580, DVR8-4580, DVR16-4580
- DVR-5000
AHD cameras are available in the following types: bullet / lipstick cameras, dome cameras, box cameras, hidden spy cameras, PTZ cameras, 180 Degree cameras, motorized zoom cameras, elevator cameras, and LPR camera. Please check the specification on each camera to see if the camera supports IR night vision and if it can be used indoors only, or indoor / outdoor.
720p AHD Cameras
These Swann DVRs only work analog CCTV (CVBS) and 720p AHD cameras. They do not work with 1080p AHD cameras.
- DVR-4400
1080p HD-TVI Cameras
These Swann DVRs are compatible with these 1080p HD-TVI cameras.
- DVR-4480
- DVR-4500
- DVR-4550
- DVR-4575
- DVR-4750 (also known as models DVR8-4750, DVR4-4750, 84750, 44750)
- DVR-5000
HD-TVI cameras are available in the following types: bullet / lipstick cameras, dome cameras, hidden spy cameras, motorized zoom cameras, pan tilt zoom cameras, and 180 security cameras. Please check the specification on each camera to see if the camera supports infrared night vision and if it can be used indoors only, or indoor / outdoor.
5 Megapixel Cameras
The following Swann DVR models are compatible with these 5mp security cameras.
- DVR-4900
- DVR-4980
- DVR-5580 – (DVR8-5580, DVR16-5580)
8 Megapixel / 4K Cameras
The following Swann DVR models are compatible with these 4K security cameras.
- DVR-5580 – (DVR8-5580, DVR16-5580)
Swann Microcam 3.3 Wireless
Please note that the Swann DVR-5580 recorder also works with 5mp, 1080p / 2mp and 720p BNC cameras.
Analog CCTV Cameras / 960H DVRs
These Swann DVRs are compatible with these analog CCTV cameras. However, CCTV Camera Pros highly recommend our hybrid analog / HD security cameras if you see one that you like. Our hybrid cameras work with Swann analog CCTV DVRs, and also with the latest HD surveillance DVRs. So, if you upgrade your DVR later, you can still use these cameras by switching them to HD video mode.
- DVR-1000
- DVR-1425
- DVR-1500
- DVR-1525
- DVR-2250
- DVR-2900
- DVR-3000
- DVR-3200
- DVR-3250 – SWDVR-83425H, DVR8-3425, DVR16-3425, DVR4-3425
- DVR-3425
- DVR-3450
- DVR-4000
- DVR-4100
- DVR-4150
- DVR-4200
Analog CCTV cameras are available in the following types: infrared cameras, dome cameras, bullet cameras, box cameras, PTZ cameras, elevator cameras. Please check the specification on each camera page to see if it supports infrared night vision and whether it can be used indoors only or if it is weatherproof for indoor / outdoor installation.
Swann Replacement DVR
If you are looking for a replacement DVR with Swann camera compatibility, I highly recommend these Viewtron hybrid CCTV / HD security camera DVRs. It is compatible with most Swann security cameras including D1, 960H, analog CCTV, AHD, and HD-TVI models. These DVRs are also compatible with the latest 4mp security cameras and 8mp / 4K security cameras. You can even add Viewtron network IP cameras to these DVRs if you like.
In addition to being highly compatible with just about every surveillance video format, Viewtron DVRs have an extremely easy to use interface. You can watch a demo video here. You can watch many more Viewtron surveillance system video demos here.
This is a snapshot if the remote camera viewing app for iPhone. Viewtron DVRs and NVRs include some of the best remote viewing security camera apps and software available.
Swann DVR Camera Compatibility FAQ
- What type of cable is used to connect a CCTV camera to a Swann DVR?
Analog CCTV cameras and HD-over-Coax security cameras (AHD and HD-TVI) can be wired to Swann DVRs using pre-made BNC camera cable or by custom cutting cable from a spool of RG59 Siamese. - Can I extend the length of the cables that were included with my Swann system?
Yes, you can extend the distance of cables included with Swann DVR systems by using a female to female BNC connector to connect an additional security camera cable. Please note that pre-made cables are more limited in the total distance they can be run. In my experience, you can not run pre-made cables longer than 200-250 feet max. - How can I connect my Swann camera directly to a TV?
If you are using an analog HD (AHD) or HD-TVI format Swann security camera, you can use this BNC to HDMI converter. - Can I split the video signal of my Swann camera so that I can connect it to two devices?
Yes, CCTV camera splitters are available to share the video signal from one camera with multiple devices. Video amplifiers are also available on that page that can boost the video signal of security cameras that use RG59 cable. - Can I use CAT-5 or CAT-6 network cable to wire Swann CCTV cameras?
Yes, video baluns can be used to wire CCTV cameras and HD-over-Coax security cameras using CAT-5 cable. If you are using AHD or HD-TVI format cameras, please take a look at this page for HD-TVI baluns. They also work with AHD cameras.
Have Questions / Need Help?
This article covers the most popular model Swann DVRs that were available at the time of writing. If your DVR is not here or if you are having trouble figuring out which security cameras are compatible with your DVR, feel free to contact me. You can also email me any other questions that you may have.
Applications hewlett packard uninstall. Swann has an array of IP security cameras and many of them can be hard reset. If you lost or forgot the password on a Swann camera, simply perform the reset procedure and bring the camera to factory default settings.
Also, it's recommended to reset the cameras if you have constant issues with their performance. Usually, once the camera is reset, many software related errors go away. In this step-by-step guide, we've listed the reset procedure for Swann cameras.
How to reset Swann cameras
How to reset NHD series IP cameras
Applicable to these models: NHD-805, NHD-806, NHD-810, NHD-811, NHD-815, NHD-815AF, NHD-816, NHD-817, NHD-818, NHD-819.
For the cameras listed above, there is an extra cable that isn't a connector but rather, a reset button.Steps to reset the camera:
- Disconnect the camera from the NVR (or from a PoE switch or a power adapter) to turn it off completely.
- Press and hold the reset button.
- While holding down the reset button, plug the camera back to the NVR (or to the PoE switch or a power adapter) and continue holding down the reset for 30 seconds, then release.
- After that, the camera's credentials and settings will go to factory default. Access the camera with the default password or initialize it again.
How to reset NHD-851
Step 1. Unscrew and remove the camera's dome cover.Step 2. Disconnect and reconnect power (Ethernet cable from NVR or PoE switch to the camera), then press and hold the reset button for 10 seconds. Release the button and the camera will go to factory default settings.
How to reset NHD-8XX series IP cameras
The following Swann DVR models are compatible with these 4K security cameras.
- DVR-5580 – (DVR8-5580, DVR16-5580)
Swann Microcam 3.3 Wireless
Please note that the Swann DVR-5580 recorder also works with 5mp, 1080p / 2mp and 720p BNC cameras.
Analog CCTV Cameras / 960H DVRs
These Swann DVRs are compatible with these analog CCTV cameras. However, CCTV Camera Pros highly recommend our hybrid analog / HD security cameras if you see one that you like. Our hybrid cameras work with Swann analog CCTV DVRs, and also with the latest HD surveillance DVRs. So, if you upgrade your DVR later, you can still use these cameras by switching them to HD video mode.
- DVR-1000
- DVR-1425
- DVR-1500
- DVR-1525
- DVR-2250
- DVR-2900
- DVR-3000
- DVR-3200
- DVR-3250 – SWDVR-83425H, DVR8-3425, DVR16-3425, DVR4-3425
- DVR-3425
- DVR-3450
- DVR-4000
- DVR-4100
- DVR-4150
- DVR-4200
Analog CCTV cameras are available in the following types: infrared cameras, dome cameras, bullet cameras, box cameras, PTZ cameras, elevator cameras. Please check the specification on each camera page to see if it supports infrared night vision and whether it can be used indoors only or if it is weatherproof for indoor / outdoor installation.
Swann Replacement DVR
If you are looking for a replacement DVR with Swann camera compatibility, I highly recommend these Viewtron hybrid CCTV / HD security camera DVRs. It is compatible with most Swann security cameras including D1, 960H, analog CCTV, AHD, and HD-TVI models. These DVRs are also compatible with the latest 4mp security cameras and 8mp / 4K security cameras. You can even add Viewtron network IP cameras to these DVRs if you like.
In addition to being highly compatible with just about every surveillance video format, Viewtron DVRs have an extremely easy to use interface. You can watch a demo video here. You can watch many more Viewtron surveillance system video demos here.
This is a snapshot if the remote camera viewing app for iPhone. Viewtron DVRs and NVRs include some of the best remote viewing security camera apps and software available.
Swann DVR Camera Compatibility FAQ
- What type of cable is used to connect a CCTV camera to a Swann DVR?
Analog CCTV cameras and HD-over-Coax security cameras (AHD and HD-TVI) can be wired to Swann DVRs using pre-made BNC camera cable or by custom cutting cable from a spool of RG59 Siamese. - Can I extend the length of the cables that were included with my Swann system?
Yes, you can extend the distance of cables included with Swann DVR systems by using a female to female BNC connector to connect an additional security camera cable. Please note that pre-made cables are more limited in the total distance they can be run. In my experience, you can not run pre-made cables longer than 200-250 feet max. - How can I connect my Swann camera directly to a TV?
If you are using an analog HD (AHD) or HD-TVI format Swann security camera, you can use this BNC to HDMI converter. - Can I split the video signal of my Swann camera so that I can connect it to two devices?
Yes, CCTV camera splitters are available to share the video signal from one camera with multiple devices. Video amplifiers are also available on that page that can boost the video signal of security cameras that use RG59 cable. - Can I use CAT-5 or CAT-6 network cable to wire Swann CCTV cameras?
Yes, video baluns can be used to wire CCTV cameras and HD-over-Coax security cameras using CAT-5 cable. If you are using AHD or HD-TVI format cameras, please take a look at this page for HD-TVI baluns. They also work with AHD cameras.
Have Questions / Need Help?
This article covers the most popular model Swann DVRs that were available at the time of writing. If your DVR is not here or if you are having trouble figuring out which security cameras are compatible with your DVR, feel free to contact me. You can also email me any other questions that you may have.
Applications hewlett packard uninstall. Swann has an array of IP security cameras and many of them can be hard reset. If you lost or forgot the password on a Swann camera, simply perform the reset procedure and bring the camera to factory default settings.
Also, it's recommended to reset the cameras if you have constant issues with their performance. Usually, once the camera is reset, many software related errors go away. In this step-by-step guide, we've listed the reset procedure for Swann cameras.
How to reset Swann cameras
How to reset NHD series IP cameras
Applicable to these models: NHD-805, NHD-806, NHD-810, NHD-811, NHD-815, NHD-815AF, NHD-816, NHD-817, NHD-818, NHD-819.
For the cameras listed above, there is an extra cable that isn't a connector but rather, a reset button.Steps to reset the camera:
- Disconnect the camera from the NVR (or from a PoE switch or a power adapter) to turn it off completely.
- Press and hold the reset button.
- While holding down the reset button, plug the camera back to the NVR (or to the PoE switch or a power adapter) and continue holding down the reset for 30 seconds, then release.
- After that, the camera's credentials and settings will go to factory default. Access the camera with the default password or initialize it again.
How to reset NHD-851
Step 1. Unscrew and remove the camera's dome cover.Step 2. Disconnect and reconnect power (Ethernet cable from NVR or PoE switch to the camera), then press and hold the reset button for 10 seconds. Release the button and the camera will go to factory default settings.
How to reset NHD-8XX series IP cameras
Applicable to these models: NHD-820, NHD-830, NHD-835, NHD-850, NHD-880, NHD-881.
Swann Camera 2.4ghz
For most of the camera models mentioned above, there is a reset button at the back of the camera. NHD-850/880 is a different story, as mentioned in the manual, you need to unscrew the bottom cover of the camera to access the reset button.Steps to reset the camera:
- Reboot the camera by disconnecting the power source (Ethernet for PoE and power adapter for non-PoE) then plugging it back in.
- Within 10 seconds of powering up the camera, press and hold the reset button for 10 seconds.
- The camera will be reset to factory settings.
Swann Wireless Security Cameras
Another way to reset the camera is by using the username admin and as password the MAC address of the device (uppercase, NO punctuation)
Swann Camera Wires
